Most guys try not to talk about penis size because it is a painful topic for them. Some guys, even with normal sizes, want to change the length of their penis. Today this can be done in a variety of ways, even without surgeries. For example, a vacuum pump for men will help lengthen the penis. Before purchasing this device you should learn how to use the pump properly to enlarge your penis.
It is possible to enlarge the penis with a pump
First of all, you need to find out whether a vacuum pump helps with erection and whether it is realistic to enlarge the penis with a pump, as some doubt the effectiveness of this method.
Until recently, such a vacuum pump was used only to improve erections. Indeed, when using the pump for the penis, the blood flow increased several times, causing the erection to increase. Over time, boys who have improved their erection by doing this have noticed that penis sizes have increased more after using this device. Therefore, you should not think about whether it is possible to enlarge the penis with a vacuum pump as it has long been approved.
Many people recommend using just such a device to resize the penis at home.
Due to the constant stimulation of blood circulation, the epithelial tissue is constantly growing and thus the penis is extended.
It has been proven that most of the guys who use this device regularly have achieved good results. Just a month later, a penis enlargement pump helped him two and a half times thicker. The length also increases, but much more slowly than the width.
How the penis enlargement pump works
If you regularly use a vacuum pump to enlarge your penis, blood will flow to the phallus tissue. This allows the penis to lengthen and thicken. It is no secret that inside the body is a tissue made up of blood vessels. If blood circulation is increased, then the gradual expansion of these cells begins.
The vacuum created by thedevice systematically increases blood flow and thus fills the cloud tissue. This leads to an improvement in potency, stretching the skin of the genitals and enlarging it.
varieties
Most penis enlargement pumps do not differ in structure. Outwardly, they look like ordinary plastic flasks with a ruler on them. Penis enlargement pumps are sold with a bulb, which is needed to create pressure in the bulb and with a special seal.
However, some models may have a vent valve, pressure gauge or a special pressure control knob.
There are several types of these devices.
Manual
Many men choose a hand pump to enhance their dignity. This model has a built-in special piston that allows you to completely remove air from the flask. Such pumps are the cheapest and therefore they are used more often than others.
Automatic
An automatic pump allows you to enlarge your penis much faster than a manual one. It is connected to an electric pump that is powered by batteries. The person does not need to make any effort to use this model. It is enough just to regulate the pressure and use a vacuum electric pump.
water
Not all men use water pumps to enlarge their penis as these models have appeared relatively recently. In this case, water is added to the container. Such devices are more effective and have virtually no contraindications. Also, the advantages of water models include their longevity.
It is not possible to uniquely determine which hydraulic pump for penis enlargement is best, as all of the above models have their own differences.
Choice Functions
Before doing a penis enlargement with a vacuum pump you need to figure out how to choose the right device. The following recommendations should be followed when choosing:
- The length of the penis bulb should be 3-4 cm longer than the erect phallus;
- The device should be 2-3 cm wide at the time of erection during the erection;
- For beginners it is recommended to use a device equipped with a pear-shaped oxygen pump;
- Vacuum pump to enlarge the penis should be made of a reliable material that can achieve complete sealing.
You should also consider how much the purchased device costs. If there are no financial constraints, then you can immediately buy an automatic model.
How to make a pump yourself
If you want, you can make a pump for your penis with your own hands. Men's hand pump should consist of the following elements:
- vial. The item is designed to fit the penis.
- pump. Binding element used for oxygen pump.
- pipes. In most models it is used to connect to a pump flask. However, sometimes you can find models without pipes. In this case, the structure is monolithic and the pump is attached directly to the flask without the use of auxiliary elements.
To make this device stand-alone to improve your potency, you must follow these instructions:
- It is recommended to use a bubble to create a flask. First, a special hole is made in it into which the penis is inserted. It should be free of niches and therefore make sure it is perfectly flat.
- After finishing the first hole, you need to move on to the next. It should be perpendicular to the walls. This hole is created to install the pipe that will be connected to the pump. The width of the hole is determined based on the dimensions of the connected hose.
- The pipes are connected to the created hole. For this it is recommended to use a hose with high density and thick walls. A hose made of very thin material prevents curves in the air, which can adversely affect the operation of the device.
- A paper tunnel should be placed at the bottom of the container to be used for future sealing. The thickness of the penis should be equal to the width of the erect penis.
- When the sealant is completely dry, you can start connecting the pump. For this you can use a small aquarium pump or an ordinary rubber bulb.
This device is enough to understand whether the pump is enlarging the penis. However, for better performance, it is still recommended to buy high quality vacuum pumps.
How to use a penis enlargement pump
Not everyone knows how to use a penis pump. For proper use of a vacuum pump you need an instruction that describes the features of using this device.
Before using the penis enlarger, I lubricate the plastic flask with a little lubricant. In this case I only use non-greasy lubricants to avoid accidental damage to the flask. When the bulb is completely lubricated, the penis can be placed in it. At the same time, it should be positioned so that it fits snugly against the walls. This then starts pumping air and this leads to the fact that the blood circulation gradually starts to increase.
When using a pump to lengthen the penis, it is necessary to fix the flask with one hand and remove the oxygen on the other using a pear. It is also necessary to completely cover the hole in the flask, which helps to create a complete hardening. After a few minutes you may notice a strong redness of the enlarged penis.
Redness indicates that a subsequent increase in erection may be harmful and should therefore release air into the flask.
When the erection is slightly weakened, the procedure should be repeated. The duration of the device is 20-30 minutes. This device should be used to treat impotence once every 2-3 days. However, it is recommended to use the pump during the first week, especially before sex. Indeed, for some men it is important to increase the length of the penis immediately before sexual intercourse. When lengthening the penis, a special erection ring can be used after the pump. It is fixed at the base of the penis and does not allow the erection to disappear quickly.
Contraindications
Before enlarging the penis with a pump, you should be aware of the main contraindications. Penis extension device may not be used:
- People with infectious urethritis and inflammation;
- Men with thrombosis.
It is therefore advisable to consult an andrologist so that he or she can perform all the necessary tests and make a conclusion about the need for a penis enlargement pump.
Conclusion
Many guys wonder if it is possible to enlarge the penis with a pump? To understand this, you need to get acquainted with the working principle of this device and contact those who have used it.